Product Description
13
Table 1. Feature Summary (continued)
Hardware Monitor
Subsystem
• Hardware management ASIC
• Voltage sense to detect out of range power supply voltages
• Thermal sense to detect out of range thermal values
• Three fan sense inputs used to monitor fan activity
• Fan speed control
BIOS
• Intel/AMI BIOS (resident in the Intel
82802AB FWH)
• Support for Advanced Configuration and Power Interface (ACPI), Plug and Play,
and SMBIOS
Instantly Available
PC Technology
• Support for PCI Local Bus Specification Revision 2.2
• Suspend to RAM support
• Wake on PCI, CNR, RS-232, front panel, PS/2 devices, and USB ports
For information about Refer to
The Desktop Board D845PEBT2’s compliance level with ACPI,
Plug and Play, and SMBIOS.
Section 1.4, page 17
1.1.2 Manufacturing Options
Table 2 describes the manufacturing options for the Desktop Board D845PEBT2. Not every
manufacturing option is available in all marketing channels. Please contact your Intel
representative to determine which manufacturing options are available to you.
Table 2. Manufacturing Options
Audio
The Desktop Board D845PEBT2 includes one of the following for AC ’97
processing:
• 6-channel audio subsystem using the Analog Devices AD1980 codec
• 2-channel audio subsystem using the Analog Devices AD1981B codec
CNR
Communication and Networking Riser (CNR) connector.
NOTE: LAN and USB CNR cards are not supported.
IEEE 1394a-2000
• Agere Systems FW323 controller
• Three IEEE 1394a-2000 ports
SATA/SATA RAID
or
IDE RAID
The Desktop Board D845PEBT2 includes one of the following:
• SATA subsystem consisting of:
— Silicon Image SiI 3112A controller supporting individual drives, and RAID 0
and RAID 1 configurations
— Two SATA connectors supporting a total of two drives
• IDE RAID subsystem consisting of:
— Promise
†
Technology PDC20267 ATA/100 controller supporting RAID 0,
RAID 1, and RAID 0+1 configurations
— Two IDE connectors supporting a total of four drives (Boards with IDE RAID
have four IDE connectors. Two are connected to the IDE RAID controller)
For information about Refer to
Available configurations for the Desktop Board D845PEBT2 Section 1.2, page 16