71
3 Updating the BIOS
The BIOS Setup program can be used to view and change the BIOS settings for the
computer. You can access the BIOS Setup program by pressing the <F2> key after
the Power-On Self-Test (POST) memory test begins and before the operating system
boot begins.
This chapter tells you how to update the BIOS by either using the Intel
®
Express BIOS
Update utility or the Iflash Memory Update utility, and how to recover the BIOS if an
update fails.
Updating the BIOS with the Intel
®
Express
BIOS Update Utility
With the Intel Express BIOS Update utility you can update the system BIOS while in
the Windows environment. The BIOS file is included in an automated update utility
that provides the ease of use of a Windows-based installation wizard.
To update the BIOS with the Intel Express BIOS Update utility:
1. Go to the Intel World Wide Web site:
http://support.intel.com/support/motherboards/desktop/
2. Navigate to the DQ57TML page, click “Latest BIOS and driver updates,” select
“BIOS Update [TMIBX10H.86A],” and download the Express BIOS Update utility
file.
3. Download the file to your hard disk drive. (You can also save this file to a
removable USB device. This is useful if you are updating the BIOS for multiple
identical systems.)
4. Close all other applications. This step is required. Your system will be rebooted at
the last Express BIOS Update window.
5. Double-click the executable file from the location on your hard disk drive where it
was saved. This runs the update program.
6. Follow the instructions provided in the dialog boxes to complete the BIOS update.
To Next Page
Loading...
Need help?
General
