Intel E810-CQDA2T - Example Ts2 Phc Configuration File; Example Ptp4 L Configuration File for BC

722960-002 63
Intel
®
Ethernet Network Adapter E810-CQDA2T
User Guide
5.8 Example ts2phc Configuration File
[global]
use_syslog 0
verbose 1
logging_level 7
ts2phc.pulsewidth 100000000
# For GNSS module
ts2phc.nmea_serialport /dev/gnss0 #/dev/gnssX, where X is GNSS device number.
leapfile /home/<USER>/linuxptp-4/leapseconds.list
[enp1s0f0(dev/ptp4)]
ts2phc.extts_polarity rising
Note: The leapfile option is available but not necessary for the program to run.
5.9 Example ptp4l Configuration File for BC
[global]
#
# Default Data Set
#
twoStepFlag 1
slaveOnly 0
priority1 129
priority2 255
domainNumber 24
utc_offset 37
clockClass 255
clockAccuracy 0xFE
offsetScaledLogVariance 0xFFFF
free_running 0
freq_est_interval 1
dataset_comparison G.8275.x
G.8275.portDS.localPriority 128
#
# Port Data Set
#
logAnnounceInterval -3
logSyncInterval -4
logMinDelayReqInterval -4
logMinPdelayReqInterval 0
announceReceiptTimeout 3
syncReceiptTimeout 3
delayAsymmetry 0
fault_reset_interval 4
neighborPropDelayThresh 800
min_neighbor_prop_delay -20000000
#
# Run time options
#
assume_two_step 1
logging_level 6
path_trace_enabled 1
follow_up_info 0