41
Step3.
How to make a RAID driver diskette?
1: Insert the boot diskette which is being formatted on a system which can start OS.
2: After booting OS insert the bundle CD in your CD-ROM
.
3: Copy all the files from
CD: \intel6x\pch_ahci_raid\f6flpy32 (For 32-bit Windows
XP/vista/7 OS) or CD: \intel6x\pch_ahci_raid\f6flpy64 (For 64-bit Windows XP/vista/7
OS) to boot diskette.
Once you have the SATA driver diskette ready, you may start to install Windows OS on your
System.
Installation of Windows OS
For installation of Windows OS, please insert Windows OS CD into the CD-ROM drive. Then
remove the boot diskette, and boot the system. At the very beginning, you will see the message at
the bottom of screen, “Press F6 if you need to install a third party SCSI or RAID driver….”
At this moment, please press <F6> key and follow the instructions of Windows XP/2000 for the
proper installation.
If you are Windows 7 /Vista OS, please load SATA RAID driver from this location.
To Next Page
Loading...
Need help?
General
