Intel PENTIUM P6000 - DATASHEET 2010 - Table 7-42 Processor Uncore I;O Buffer Supply DC Voltage and Current Specifications

Datasheet 97
Electrical Specifications
NOTES:
1. The voltage specification requirements are defined across at the socket motherboard pinfield vias on the
bottom side of the baseboard.
2. The voltage specification requirements are defined across VTT_SENSE and VSS_SENSE_VTT pins on the
bottom side of the baseboard.
3. Defined at nominal VTT voltage
4. These are pre-silicon estimates and are subject to change.
5. Based on junction temperature of 50°C.
Table 7-42.Processor Uncore I/O Buffer Supply DC Voltage and Current Specifications
Symbol Parameter Min Typ Max Unit Note
V
TT
Voltage for the memory controller and
shared cache defined at the
motherboard Vtt pinfield via
0.9975 1.05 1.1025 V 1
Voltage for the memory controller and
shared cache defined across
VTT_SENSE and VSS_SENSE_VTT
0.9765 1.05 1.1235 V 2
V
DDQ
(DC+AC) Processor I/O supply voltage for DDR3
(DC + AC specification)
1.425 1.5 1.575 V
V
CCPLL
PLL supply voltage (DC + AC
specification)
1.710 1.8 1.890 V
TOL
TT
V
TT
Tolerance defined at the socket
motherboard VTT pinfield via
DC: ±2%
AC: ±3% including ripple
%1
V
TT
Tolerance defined across
VTT_SENSE and VSS_SENSE_VTT
DC: ±2%
AC: ±5% including ripple
2
TOL
DDQ
VDDQ Tolerance DC= ±3%
AC= ±2%
AC+DC= ±5%
%
TOL
CCPLL
VCCPLL Tolerance AC+DC= ±5% %
I
CCMAX_VTT
Max Current for V
TT
Rail
SV
ULV
-
18
16
A3
I
CCMAX_VDDQ
Max Current for V
DDQ
Rail - 3 A
I
CCMAX_VDDQ_CK
0.2 A 4
I
CCMAX_VTT0_DDR
2.6 A 4
I
CCMAX_VCCPLL
Max Current for V
CCPLL
Rail - 1.35 A
I
CCTDC_VTT
Thermal Design Current
(TDC) for V
TT
Rail
SV
ULV
-
18
16
A3
I
CCAVG_VDDQ
(Standby)
Average Current for V
DDQ
Rail during
Standby
-0.33A 5