IntelĀ® Server Board S1200SP Family Technical Product Specification
41
5.3.1 Hardware Requirements
NM is supported only on platforms that have the NM FW functionality loaded and enabled on the Management
Engine (ME) in the SSB and that have a BMC present to support the external LAN interface to the ME. NM power
limiting feature requires a means for the ME to monitor input power consumption for the platform. This
capability is generally provided by means of PMBus*-compliant power supplies although an alternative model
using a simpler SMBus* power monitoring device is possible (there is potential loss in accuracy and
responsiveness using non-PMBus* devices). The NM SmaRT/CLST feature requires specific PMBus*-compliant
power supplies as well as additional hardware on the baseboard.
To Next Page
Loading...
