Intel S2600WF Series User Manual

Intel® Server S2600WF Product Family Configuration Guide
29
Table 7. Intel® Server System R1000WF product family features
Feature
Description
Chassis Type
1U rack mount chassis
Server Board
Intel® Server Board S2600WF product family
Maximum Supported Processor Thermal
Design Power (TDP)
Up to 165 W
Note: Intel® Server Systems in this family may support a lower maximum Thermal Design Power (TDP). See the appropriate Intel®
System TPS for maximum supported TDP.
External I/O Connections
• DB-15 video connectors
o Front and back
• RJ-45 serial port A connector on back panel
• Dual RJ-45 network interface connectors (S2600WFT-based systems only)
• Dedicated RJ-45 server management port on back panel
• (3) – USB 3.0 connectors on back panel
•
(2) – USB 3.0 connectors on front panel (non-storage system configurations only)
Internal I/O Connectors/Headers
• (1) – Type-A USB 2.0 connector
•
(1) – DH-10 serial port B connector
System Fans
• (6) – managed 40 mm dual rotor system fans
• One power supply fan for each installed power supply module
Riser Card Support
Support for two riser cards:
• Riser #1 – PCIe* 3.0 x24
• Riser #2 – PCIe* 3.0 x24
With two riser cards installed, up to two possible add-in cards can be supported (one x16 PCIe* 3.0 add-in card slot per riser card):
• (2) full height/half-length add-in cards via Risers #1 and #2
Power Supply Options
The server system can have up to two power supply modules installed, providing support for the following power configurations:
1+0, 1+1 redundant power, and 2+0 combined power.
(3) power supply options:
• AC 1100 W Platinum
• AC 1300 W Platinum
• DC 750 W Gold
Drive Bay Options
• Hot-swap backplane options:
o 4 x 3.5” SAS/SATA backplane
o 8 x 2.5” combo backplane – SAS/SATA/NVMe
Note: All available backplane options have support for SAS 3.0 (12 Gb/sec).
• Storage bay options:
o 4 x 3.5” SAS/SATA hot swap drive bays + front panel I/O
o 8 x 2.5” SAS/SATA/NVMe* hot swap drive bays + front panel I/O
Supported Rack Mount Kit Accessory
Options
• AXXELVRAIL – Enhanced value rack mount rail kit – 424 mm max travel length, 59 kg max supported weight
• A1UFULLRAIL – 1U premium rail kit with CMA support – 780 mm max travel length, 18 kg max supported weight
• A1USHRTRAIL – 1U premium rail kit without CMA support – 780 mm max travel length, 18 kg max supported weight
• AXX2POSTBRCKT – Two post fixed mount bracket kit
• AXX1U2UCMA2– Cable management arm (CMA) (supported with AXXFULLRAIL only)

Intel S2600WF Series Specifications

General

Form Factor	2U rackmount
Memory Support	DDR4 ECC Registered DIMMs
Chipset	Intel C621
Storage Options	SATA, SAS, NVMe (depending on the specific model)
Management	Intel Node Manager
Product Type	Server Motherboard / System
CPU Socket Type	LGA 3647
Memory Type	DDR4 ECC Registered
Storage Controllers	Intel VROC
SATA Ports	10 SATA3 ports
Network Controller	Intel i350-AM4
Expansion Slots	7 x PCIe 3.0 slots (x16, x8, x4)
SAS Ports	Support through optional add-on cards