Intel® Server S2600WF Product Family Configuration Guide
48
Table 16. Intel® Server Chassis R2000WFXXX product specifications and configuration requirements
Intel® Server Chassis R2000WFXXX
2U, no front mount drives
712 x 439 x 89 mm (L x W x H)
983 x 577 x 260 mm (L x W x H)
Required Items (sold separately)
Optional Accessories (sold separately)
(1) – 2U Chassis with Quick Reference Label affixed to top
cover
(1) – Pre-installed tandard control panel assembly
(board only – iPC FXXPANEL2)
o 300 mm front panel cable – iPN H34381-xxx
(1) – Pre-installed front I/O panel assembly (1x VGA and 2x
USB 3.0)
o 620 mm USB 3.0 cable – iPN H76899-xxx
o 400 mm video cable – iPN H62114-xxx
(1) – Standard 2U air duct iPN H90554-xxx
(6) – 60 mm hot swap system fan – iPC FR2UFAN60HSW
(2) – CPU heat sink – iPC H38569-xxx
(2) – CPU heat sink “No CPU” label insert – iPN J16115-xx
(2) – Standard CPU carrier – iPN H72851-xxx
(1) – 3x Intel® RAID Maintenance Free Backup unit
mounting bracket – iPN H18238-00x
(16) – DIMM slot blank – iPN G75158-xxx
(1) – 175 mm I2C cable – iPN H91172-xxx
(1) – 250 mm I2C cable – iPN H91166-xxx
(1) – 400/525/675 mm HSBP power cable –
iPN H82108-xxx
(1) – Internal fixed mount 250 mm SSD drive power cable -
iPN J29245-xxx
(2) – Riser card mounting brackets supporting up to 3 riser
cards (riser cards sold separately – see Section 5.2)
(1) – Power supply bay blank insert
(2) – AC power cord retention strap assembly –
iPN H23961-00x
Server board and riser card mounting screws
Spares for each screw type included
• Intel® Server Board S2600WF (choose
one)
o iPC S2600WFT(R)
o iPC S2600WF0(R)
o iPC S2600WFQ(R)
• Power supply module(s) (choose one
type) – (2) common modules required
for redundancy
o 1300W AC power supply module –
iPC AXX1300TCRPS
o 1100W AC power supply module -
iPC AXX1100PCRPS
o 750 W DC power supply module -
iPC AXX750DCCRPS
• Power cord(s) – See Section 5.6
• Rack mount kit – See Section 5.7
• (1) or (2) 1
st
or 2
nd
Gen Intel® Xeon®
processor Scalable family – see Section
1.1.1 for details on processor support
• ECC DDR4 memory (RDIMM or LRDIMM)
• Up to (3) 8 x 2.5” drive bay modules:
o SAS/SATA/NVMe* combo – iPC A2U8X25S3PHS
o Dual port SAS – iPC A2U8X25S3DPDK2
• 8 x 3.5” drive bay module – iPC A2U8X35S3HSDK1 (Reuses control
panel and front I/O panel. Includes SAS/SATA data cables and
peripheral power cable)
Rear storage bay option
• Up to (2) hot swap SATA SSDs – iPC A2UREARHSDK2
Riser Cards – Up to (3) can be installed concurrently
• Risers Slots #1 and #2 – Available riser cards include:
o 3-slot riser card, (3) x8 PCIe* 3.0 slots – iPC A2UL8RISER2
o 2-slot riser card, (1) x16 PCIe* slot and (1) x8 PCIe* slot – iPC
A2UL16RISER2
• Riser Slot #3 – Available riser cards include:
o 2-slot riser card, (1) low profile x8 PCIe* 3.0 slot and (1) low profile
x8 PCIe* 2.0 slot – iPC A2UX8X4RISER
Other
• SAS/SATA/NVMe data cables – Cable selection is dependent on
desired storage option. See Chapter 4 for available cable options
• Intel® RAID Card/Module – See Section 5.5 for options
• SAS Expander Options – See Sections 4.6.2 and 4.7.4
• Intel® Ethernet Network Adapter for OCP* - See Chapter 5.4 for
available options
• Intel® Remote Management Module 4 Lite RoHS free key for
advanced management features - iPC AXXRMM4LITE2
• DDDC DDR-compatible Intel® Optane™ DC persistent memory module
(supported by Intel® Server Boards S2600WFTR, S2600WF0R, and
S2600WFQR with a 2
nd
Gen Intel® Xeon® Scalable processor)
See Chapters 5 and 6 for all available accessory options.
To Next Page
Need help?
General
