Intel S2600WF Series - Page 38

Intel® Server S2600WF Product Family Configuration Guide
38
Feature
Description
Drive Bay Options
•
Hot-swap backplane options:
o 8 x 2.5” combo backplane – SAS/SATA/NVMe*
o 8 x 2.5” dual port SAS
o 12 x 3.5” SAS/ SATA (supports up to 2 NVMe drives)
Note: All available backplane options have support for SAS 3.0 (12 Gb/sec).
• Storage bay options:
o 12 x 3.5” SAS/SATA hot-swap drive bays (supports up to 2 NVMe drives) + storage front panel
o 8 x 2.5” SAS/SATA/NVMe hot-swap drive bays + PFR front panel
o 16 (8+8 accessory) x 2.5” SAS/SATA/NVMe hot-swap drive bays + PFR front panel
o 2 x 2.5” SATA SSD back of chassis hot-swap drive bays (accessory option)
o 2 x internal fixed mount 2.5” SSDs (all system models)
Supported Rack Mount Kit Accessory
Options
• AXXELVRAIL – Enhanced value rack mount rail kit – 424 mm max travel length, 59 kg max supported weight
• AXXFULLRAIL – 2U premium rail with CMA support – 800 mm max travel length, 45 kg max supported weight
• AXXSHRTRAIL – 2U premium rail without CMA support – 788 mm max travel length, 45 kg max supported weight
• AXX2POSTBRCKT – Two post fixed mount bracket kit
• AXXCMA2– Cable management arm (supported with AXXFULLRAIL only)