Interacoustics AT235 - Page 29

AT235 Instructions for Use - EN Page 23
U
Pressing the arrow up button moves the reflex selection to the previous reflex
row. Moving the selection sideways is done with the wheel (19).
V
Pressing the arrow down button moves the reflex selection to the next reflex
row. Moving the selection sideways is done with the wheel (19).
W
Pressing Change Status toggles the status of the currently selected reflex (Q).
Green indicates that a reflex is present while red/blue indicates that the reflex
is not present.
X
Holding the Enlarge button show the currently selected reflex (Q) in highest
available detail.
Y
Pressing Child activates a train that will move across on the lower part of the
screen to help distract the child while obtaining the measure.
In manual mode (O) the Add Stimulus button is available and allows adding
new reflex rows.
Z
In manual mode (O) the Add Level button is available and allows including
additional test intensities.