Interlogix TruVision DVR 12 - Page 76

Chapter 9: Live view
70 TruVision DVR 12 User Manual
Figure 21: Monitor setup window: General settings
Table 13: Description of the Monitor setup window: General settings
Option Description
1.
Language
Define the language of the system.
Select the desired language from the drop-down list and click
Apply. The language displayed changes immediately.
2.
Device
Name Define the DVR name. The default name is TVR 12.
Click the edit box and enter the new name from the soft keyboard.
3.
Device
Address The device number to use for the DVR when programming the
remote control or keypad. The default value is 255.
4.
Zone ID
Each DVR in a daisy chain must have a unique zone ID so that it
can be controlled by a KTD-405 keypad.
The default value is 1.
5.
R
esolution Define the resolution of the selected monitor.
Select one of the options from the drop-down list and click Apply.
The selected resolution must be the same as that of the monitor.
6.
Password R
equired Define whether a login password is required.
Check the box to enable/disable, and click Apply.
7.
Scaling
Output Video Enable/disable the monitor display of the main and auxiliary
monitor size to accommodate for differently sized monitors.
Check the box to enable/disable, and click Apply.
8.
Enable Wizard
Define whether the wizard tool starts when the DVR is turned on.
Check the box to enable/disable, and click Apply.
9.
Display Status Icons
Define whether the status icons are displayed.