Interlogix TruVision DVR 12 - Page 77

Chapter 9: Live view
TruVision DVR 12 User Manual 71
Figure 22: Monitor setup window: More settings
Table 14: Description of the Monitor setup window: More settings
Option Description
1.
Monitor
Standard The DVR can support NTSC or PAL video output. The video
standard used is auto detected but can be manually changed.
Modify the video standard used to PAL or NTSC, and click
Apply.
2.
Output Mode
Define the desired output mode.
Select one of the options from the drop-down list: Standard,
Bright, Gentle, or Vivid, and click Apply.
3.
Monitor B
rightness Modify the video output brightness.
Adjust the scroll bar point to the desired level and click Apply.
4.
Event
Hint Define whether the status icons appear on screen. See “Status
information” on page 59 for more information.
Check the box to enable/disable, and click Apply.
5.
Timebar T
ransparent Define the transparency of the monitor output time bar on
screen
relative to the background to make the time bar easier to read.
Check the box to enable/disable, and click Apply.
6.
Enable T
imebar Define whether the monitor output time bar appears on screen.
Check the box to enable/disable, and click Apply.
7.
Menu Timeout
Define the time in minutes after which the menu window reverts
to live view mode.
Select a time from the drop-down list, and click Apply.
8.
Mouse
Pointer Speed Modify the speed of the mouse pointer.
Adjust the scroll bar point to the desired level, and click Apply.
9.
Instant Playback Time
Modify the instant playback replay period. The time options are
between five to 30 minutes from actual time. Default is five
minutes
10.
Enable Front Panel Lock
When the system logs out, the front panel is automatically
locked.
To unlock the front panel, press the Live button for 5 seconds.