Intermatic GRASSLIN talento smart

EN
Service meter
You can specify the number of operating hours that will pass before a service message will be displayed
for a channel in the
Hour Counter Service menu. This is shown in the display as soon as the coun-
ter has reached the hour value set by you.
Konfig
OK
Stundenzähler
OK
Stundenzähler
Service
OK
Kanal
(1)
1
OK
Stunde
01000 h
Service
OK
Menü
1. Press the Menu button.
2. Select
Config and conrm with OK .
3. Select
Hour Counter and conrm with OK .
4. Select
Service and conrm with OK .
5. Select the channel
(1)
and conrm with OK .
6. Set count value and conrm with
OK .
(1)
The channel selection is only available with 2-channel timers
70