EN
SWITCHING STATE DISPLAY
As an example for channel 1, the switching status display appears as follows:
Channel Fix OFF Channel Fix ON Override ON
There is no display via the icon for the channel in automatic mode.
From the automatic mode, you can make the following settings using the corresponding function key for
channel 1 or channel 2, taking into account the starting point:
• ON
– Press 1x = Override OFF
– Press 2x = Channel Fix OFF
– Press 3x = Channel Fix ON
• OFF
– Press 1x = Override ON
– Press 2x = Channel Fix ON
– Press 3x = Channel Fix OFF
79
To Next Page
Loading...
