Intermec CK31 - Page 107

Chapter 3 — Developing and Installing Applications
90 CK31 Handheld Computer User’s Manual
4 Type in your new password again.
5 Select the Enable password protection at power-on option.
6 Tap OK or press Enter. You are returned to the Control
Panel.
7 Close the Control Panel.
To change your password
1 Tap the Start icon or press C and then B. The Start menu
appears.
2 Select Settings > Control Panel > Password. The Enter
Password dialog box appears.
3 In the Password field, type your password and tap OK or
press Enter.
4 Type your new password in the Password field, and then
press Tab to move to the Confirm password field.
5 Type in your new password again.
6 Select the Enable password protection at power-on option.
7 Tap OK or press Enter. You are returned to the Control
Panel.
8 Close the Control Panel.