Intermec CK31 - Programming a Virtual Key or Unicode Character

Appendix C — Reprogramming the Keypad
CK31 Handheld Computer User’s Manual 159
7 Select the Entry Mode for the Unicode character.
Entry Mode Description
Literal
You enter the actual character that the key
combination produces.
Hex
You enter a hex string. The hex string must be
preceded by 0x. The range is from 0x0 to
0xFFFF.
Decimal
You enter a decimal string. The range is from 0
to 65535.
8 Press Tab or tap in the text box to select the Enter New
Character text box.
9 Type the new character or string and press Enter. A dialog
box appears asking if you want to commit your new entry to
permanent storage.
10 Tap Yes or No.
Programming a Virtual Key or Unicode Character
You can program any Virtual Key or Unicode character to any
key or modified key combination.
To program a Virtual Key or Unicode character
1 Start the reprogrammable keypad utility.
2 Press the key you want to reprogram twice. The hexadecimal
scan code for the key appears in both fields.
3 Press Enter. The select modifiers dialog box appears.