Intermec CK31

Chapter 2 — Configuring the CK31
46 CK31 Handheld Computer User’s Manual
Configuring the Network Parameters for a TCP/IP Network
In a TCP/IP network, the CK31 communicates directly with a
host computer using TCP/IP. The access point acts as a bridge
to allow communications between the wired network and the
wireless network.
Ethernet
TCP/IP
Direct Connect
CK31s
Access point
Host
CK31 in a TCP/IP Direct Connect Network
To use wireless communications in a TCP/IP network
1 Configure these network parameters on each CK31 in the
network:
• Network name (SSID)
• IP settings (if not using DHCP)