Chapter 4 — Running Diagnostics
CK31 Handheld Computer User’s Manual 111
Sample Screen
Sound Test
Use the Sound Test to make sure the entire beeper volume range
and beep frequency range are available and working correctly.
The Sound Test can also help you choose a beeper volume and
frequency that you can hear in your working environment.
When you select the test, the CK31 sounds a series of beeps
from the default beep through the entire range of quiet to loud
beeps. After it sounds the beeper volume, it cycles through the
beeps starting with low frequency up through the highest
frequency supported.
To start the Sound Test diagnostic
• From the Start menu, tap Programs > Intermec Diagnostics
> Hardware > Sound Test.
To Next Page
Loading...
