Chapter 2 — Configuring the CK31
70 CK31 Handheld Computer User’s Manual
d Enter a User Name and a Domain.
e Press Enter.
If you choose PEAP:
a Select Properties and choose the Run App button. The
Auth. Settings box appears.
b Select the Validate Server check box.
c Press Enter. Once the radio starts to authenticate, the
Network Password dialog box appears.
d Enter a User Name and Password and enable the Save
Password check box.
e (Optional) In the Domain field, enter the domain.
f Press Enter.
8 For Network Key Setting, choose Automatic.
9 Exit Intermec Settings.
Using LEAP Security
Lightweight Extensible Authentication Protocol (LEAP), also
known as Cisco-Wireless EAP, provides username/password-
based authentication between a wireless client and a RADIUS
To Next Page
Loading...
