Chapter 2 — Configuring the CK31
CK31 Handheld Computer User’s Manual 59
PC
Ethernet
Serial cable
CK31
Host
CK31 in a Serial Network
To use serial communications with your CK31
1 Turn off the CK31.
2 Connect the CK31 to the serial port of another device. You
can do this in one of the following ways:
• Connect the CK31 serial port to a button link or serial
printer using the 26-pin to DB9 (9-pin) serial adapter and
a male-to-female null modem RS-232 cable.
• Connect the AD1 communications dock to the serial port
of the other device using a DB9 to DB9 serial adapter
cable. Insert the CK31 into the dock.
3 Turn on the CK31.
4 Make sure that your CK31 is communicating with the
network and that the network can see your CK31.
Configuring Security
The CK31 provides four types of security for your wireless
network:
• Wi-Fi Protected Access (WPA)
To Next Page
Loading...
Need help?
General
