Intermec CK31

Chapter 1 — Using the CK31 Handheld Computer
CK31 Handheld Computer User’s Manual 19
To reposition a window
1 Press Alt and then E. An icon (
) appears on the status
bar.
2 Use the numeric keypad to move the window.
Repositioning a Window: Press the appropriate number key for the
direction you want to move the window.
To center the window in the CK31 screen
• Press 5.
To turn off the repositioning feature
• Press Alt and then E.
Calibrating the Touch Screen
If the touch screen does not respond when you tap it with the
stylus, you may need to calibrate the screen.
To calibrate the screen
1 Press C and then C. The Start menu appears.
2 Press D to highlight Touch Calibrate and then press Enter.
The calibration screen appears.
3 Follow the instructions to calibrate the screen.