Chapter 4 — Running Diagnostics
106 CK31 Handheld Computer User’s Manual
LED Test
Use the LED Test to make sure that your LEDs (lights) are
operating correctly. The LED Test turns the lights on the CK31
on in this sequence: Good Read light, the user-defined lights,
Ready-to-Work indicator, and then the System Status light. The
lights blink one time each and then they blink five times each.
To open the LED Test diagnostic
• From the Start menu, tap Programs > Intermec Diagnostics
> Hardware > LED Test.
Network Information
Use the Network Information diagnostic screen to view the
DHCP server IP address, the CK31 device address, and the
MAC address.
To open the Network Information diagnostic
• From the Start menu, tap Programs > Intermec Diagnostics
> System > Network Information.
Sample Screen
To Next Page
Loading...
