Appendix C — Reprogramming the Keypad
158 CK31 Handheld Computer User’s Manual
Programming a Unicode Character
You can program any Unicode character to any key or modified
key combination.
To program a Unicode character
1 Start the reprogrammable keypad utility.
2 Press the key you want to reprogram twice. The hexadecimal
scan code for the key appears in both fields.
3 Press Enter. The select modifiers dialog box appears.
4 Select the modifier or function keys that you want to press
before you access the key you are modifying. For example, if
you want to press Shift to access the reprogrammed key, you
select Shift. You do not need to select a modifier or function
key.
5 Press Enter. The Key Response dialog box appears.
6 Select Unicode Character and press Enter. The Unicode
dialog box appears.
To Next Page
Loading...
