Intermec CK31

Chapter 4 — Running Diagnostics
100 CK31 Handheld Computer User’s Manual
Click the X to close the dialog box. The dialog box continues to
appear until the backup battery is fully charged. You must install
a fully charged main battery or place the CK31 in a charger. It
takes about 15 minutes for the backup battery to charge up to
2.4V.
If the Backup Battery Very Low dialog box continues to appear
for more than 15 minutes, view the Battery Information
diagnostic screen. If the Supercap Flag field is not Charging,
the backup battery may have failed. You may need to send the
CK31 to Intermec to have the backup battery replaced. For help,
see “Calling Product Support” on page 114.
Boot Code Version
The Boot Code Version diagnostic displays the version of boot
code loaded on your CK31.
To open the Boot Code Version diagnostic
• From the Start menu, tap Programs > Intermec Diagnostics
> Software > Boot Code Version.