Intermec CK31

Appendix C — Reprogramming the Keypad
CK31 Handheld Computer User’s Manual 163
6 Select Keyboard Command and press Enter. The Keyboard
Command Select dialog box appears.
7 Select the desired function from the list and press Enter. A
dialog box appears asking if you want to commit your new
entry to permanent storage.
8 Tap Yes or No.
Launching an Application From a Key or Key Combination
You can program any key or key combination to launch an
application.
To program a key or key combination to launch an application
1 Start the reprogrammable keypad utility.
2 Press the key you want to reprogram twice. The hexadecimal
scan code for the key appears in both fields.
3 Press Enter. The select modifiers dialog box appears.