Scan button
Good Read light (green)
Use this test bar code:
Code 39 Test Bar Code
*123456*
*123456*
When the CK31 successfully reads a bar code label, you hear
a high beep and the green Good Read light turns on briefly.
4 Release the Scan button.
To scan a PDF417 or Micro PDF417 bar code with the linear imager
1 Press I to turn on the CK31.
2 Point the scanner window PDF417 or Micro PDF417 bar
code label and hold the computer at a slight angle 15 to 25
cm (6 to 10 in) from the label.
3 Press the Scan button on the keypad or pull the trigger on a
handle, and direct the red beam so that it falls across at the
top row of the bar code label.
To Next Page
Loading...
