Intermec CK31 - Page 7

Contents
vi CK31 Handheld Computer User’s Manual
Scanning With the Standard or Near-Far Range Area Imager .....................26
Scanning with the Standard Area Imager......................................26
Scanning with the Near-Far Range Area Imager...........................27
Troubleshooting the Area Imager.................................................29
Attaching a Scanner to the Serial Port.........................................................30
Using Energy Saver Mode With Your 1551E or 1553 Scanner...................32
Verifying That Your Scanner Is Working..................................................................33
Installing the SD Card..............................................................................................34
Configuring the CK31.........................................................................................37
How to Configure the CK31 Parameters ..................................................................38
Configuring the CK31 With Setup Assistant..............................................39
Configuring the CK31 With Intermec Settings ..........................................40
Opening Intermec Settings ..........................................................40
Understanding the Commands in Intermec Settings ....................41
Navigating in Intermec Settings ...................................................42
Restoring Default Settings............................................................42
Exiting Intermec Settings.............................................................43
Configuring the CK31 With SmartSystems Console ..................................44
Synchronizing the CK31 System Time With a Time Server .......................44
Configuring the CK31 for Your Network.................................................................45
Configuring 802.11b/g Radio Communications.........................................45
Configuring the Network Parameters for a TCP/IP Network.......46
Configuring the Network Parameters for a UDP Plus Network....47
Configuring Bluetooth Communications for Wireless Scanners..................48
Configuring Bluetooth Communications for Wireless Printing ..................50
Turning On Bluetooth Power......................................................51
Creating an Application That Lets You Print Wirelessly...............51
Selecting the Current Wireless Printer on the CK31 ....................52
Configuring Ethernet Communications on Older CK31s...........................57
Configuring Serial Communications ..........................................................58
Configuring Security ................................................................................................59
Choosing Between Funk and Microsoft Security ........................................60
Selecting a Profile for Funk Security.............................................61
Selecting Microsoft as Your Security Choice.................................61
Using WPA Security ..................................................................................62
Configuring WPA Security With Funk Security...........................63
Configuring WPA Security With Microsoft Security....................65
Using 802.1x Security ................................................................................67
2