Intermec CK31 - Page 81

Chapter 2 — Configuring the CK31
64 CK31 Handheld Computer User’s Manual
5 For Association, choose WPA or WPA2 and press Enter.
Encryption automatically defaults to TKIP if you are using
WPA. Encryption automatically defaults to AES if you are
using WPA2.
6 For 8021x, choose TTLS, PEAP, or TLS and press Enter.
If you choose TTLS or PEAP:
a For Prompt for Credentials, choose Enter credentials
now.
Note: You can use Prompt for credentials to troubleshoot
your connection to the network if you have problems.
b Select User name, type your user name, and then press
Enter.
c Select User Password, type a user password, and then
press Enter.
d For Validate Server Certificate, choose Yes and press
Enter.
Note: You must have the date on the CK31 set correctly
when you enable Validate Server Certificate.
If you choose TLS:
a Load a user and root certificate on your CK31. For help,
see “Loading a Certificate” on page 73.
b For Validate Server Certificate, choose Yes and press
Enter.
c You must enter a User Name and Subject Name. You can
also enter a Server Common Name if you want to increase
your level of security.
7 Exit Intermec Settings.
To enable WPA-PSK or WPA2-PSK with Funk security
1 Make sure you have configured the communications and
radio parameters on your CK31.
2 Make sure you have selected Funk as your security choice.