Intermec easycoder f2

Intermec EasyCoder F2 – Installation & Operation Ed. 236
Chapter 5 Paper Load
Peel-Off, cont'd.
Pull out the handle to collapse the rewinder,
then remove the backing paper.
Remove any empty paper core from the paper
supply hanger.
2
1
4
3
3
4
Remove labels from the fi rst 50 cm (20")
of the web. Thread the backing paper through
the print mechanism and push it inwards
as far as it will go.
b
w
f
w
Hook a new roll of direct thermal labels on the
paper supply hanger and adjust the guide so
the label roll comes in fl ush with the wall.
2
1
4
3
6
5