Intermec PB50

Chapter 1 — Using the Mobile Printer
PB50 and PB51 Mobile Printer User Guide 7
The current printer language and firmware version appear on the
screen when the printer is in Ready mode.
The Screen of a Printer Running IPL Firmware
To select your printer language
1 Turn on your printer.
Printer Language Descriptions
Printer
Language
Description
Intermec Printer
Language (IPL)
IPL is an easy-to-use programming language that lets you
design, download, and modify formats. To setup,
configure, and use IPL, see the Intermec Printer Language
(IPL) Command Reference Manual.
Fingerprint Intermec Fingerprint is a BASIC-inspired, printer-resident
programming language you use to design label formats
and write custom printer application software. To setup,
configure, and use Fingerprint, see the Intermec
Fingerprint Command Reference Manual or the Intermec
Fingerprint Developer’s Guide.
ESC/P ESC/P is Epson™ interpreter program that interprets the
Epson Standard Code for Printers command language. To
setup, configure, and use ESC/P, see the ESC/P
Programmer’s Reference Manual.
ZSim ZSim is a Zebra™ interpreter program that interprets ZPL
II or later programs. To setup, configure, and use ZSim,
see the ZSim Programmer’s Guide.
CSim CSim is Zebra™ interpreter program that interprets CPCL
command language. To setup, configure, and use ZSim,
see the CSim Programmer’s Guide.
DSim DSim is a Datamax™ simulation program that runs
Datamax programs. To setup, configure, and use DSim,
see the DSim Programmer’s Guide.
IPL 12.0.0