Intermec PB50

Chapter 1 — Using the Mobile Printer
8 PB50 and PB51 Mobile Printer User Guide
2 If the printer language you want to run appears, press the key that
corresponds to the printer language.
If the printer language you want to run does not appear, press the
key that corresponds to the next button.
3 Press the key that corresponds to the printer language you want to
run on your printer.
4 Restart your printer.
Once your printer is running a particular printer language, you can
change the printer language from the Setup menu. The way that you
access the command language menu depends on which language you
are currently running.
Changing the Printer Language From the Setup Menu
Language How to Access the Command Language Menu
IPL
• Go to SETUP > TEST/SERVICE > CMD
LANGUAGE.
Fingerprint or
Direct Protocol
• Go to SETUP > PRINT DEFS > CMD LANGUAGE.
ZSim, DSim, or
CSim
1 Press Setup button.
2 Enter the Fingerprint password: 8311.
3 Press Setup button.
4 Go to SETUP > PRINT DEFS > CMD LANGUAGE.
<
FP
<
IPL
ESCP
>
NEXT
>
<
ZSIM
<
CSIM
DSIM
>
PREV
>