Intermec PB50

Index
84 PB50 and PB51 Mobile Printer User Guide
Numerics
802.11 wireless
authentication modes
34
configuring using Fingerprint
40–42
configuring using IPL
37–39
configuring using PrintSet 34
finding current settings
58
restarting
64
setting the pre-shared key 38, 40
setting the SSID
38, 40, 41
setting up communications
34–
42
signal strength
36
status icons
36
troubleshooting 61
using certificates
36, 39, 41
WEP
37, 40
WPA or WPA2 Enterprise 38–39,
41–42
WPA-PSK or WPA2-PSK
38, 40
A
AC18 4-bay battery charger
11, 13,
76
accessories
76–77
See also AC18 4-bay battery
charger; AE19 power
supply; AV8 vehicle cradle;
battery
administrator password
37, 38, 40
AE19 power supply
11, 77
AV8 vehicle cradle 77
B
battery
capacity
9, 61
charging error
11
charging guidelines
11, 13, 70
conserving power
12–13
expected life
9
icons
11–12
installing
10
Low Battery option
12
model number
9, 76
power specifications
70, 76
safety
9
temperature
13
when to replace
11
bin file. See firmware, upgrade
information.
black mark. See mark detection.
Bluetooth
connecting to a scanner
33–34
device address (BDA)
33
finding current settings
58
maximum range 32
setting up communications
32–
34
status icons 34
troubleshooting
61
buttons. See Control Panel.
C
calibrating the printer sensors
59
cancel printing, with
ESC/P
4, 22
Fingerprint 4, 5, 22
IPL
4, 5, 22
certificates. See 802.11 wireless,
using certificates.
cleaning
about
65–66
cleaning swab 66, 67, 77
exterior
67
identifying parts
66
label gap sensor 60
media compartment
68
platen roller
67
printhead 62, 66–67
cold boot. See restarting the printer.
communications ports. See connect
printer to PC.
connect printer to network
using 802.11 wireless
34–42
using Bluetooth 32–34
connect printer to PC
using a serial connection
31–32
using USB
30–31
Control Panel
backlight
12, 13
buttons
4
illustrated
3
layout
3–4
soft keys
5
D
default password
37, 38, 40
default settings. See factory default
settings.
differences between PB50 and PB51
3, 72
display. See Control Panel.