Intermec PM23c User Manual

Appendix B — Default Settings
PM23c, PM43, and PM43c Mid-Range Printer User Manual 129
Ethernet Settings
This section describes the Ethernet IPv4 and IPv6 settings. To view
these settings:
• From the printer Main Menu, select Settings > Communications
> Ethernet.
• From the printer web page, click the Configure tab,
Communications > Ethernet.
ENQ/ACK Specifies if software flow control
(ENQ/ACK) is used to manage the rate of
data transmission between the device and
the host.
Disable
XON/XOFF To Specifies if software flow control
(XON/XOFF) is used to manage the rate of
data transmission to the host.
Disable
XON/XOFF From Specifies if software flow control
(XON/XOFF) is used to manage the rate of
data transmission from the host.
Disable
New Line Character Defines the characters that the printer
echoes to the host to indicate that it has
moved to a new line.
CR/LF
Serial Port Settings (Continued)
Setting Description Default
Ethernet Settings
Setting Description Default
(IPv4) IP
Assignment
Method
Specifies how the printer obtains an IP
address.
DHCP
(IPv4) IP Address Specifies the unique network-level
address that is assigned to each device
in a TCP/IP network (IPv4).
0.0.0.0
Subnet Mask Specifies a number that defines the
range of IP addresses that can be used
in a TCP/IP network.
0.0.0.0

Intermec PM23c Specifications

General

Brand	Intermec
Model	PM23c
Category	Printer
Language	English