Chapter 4 — Configure the Printer
PM23c, PM43, and PM43c Mid-Range Printer User Manual 69
6 To see a complete list of printer settings, click Configuration
Summary.
To configure printer settings, click an item in the navigation pane:
• For serial, Ethernet, Wireless 802.11, or Bluetooth settings, click
Communications.
• For media or print quality settings, click Printing.
• For display, audio, service, and general settings, maintenance
alert message triggers, or to enable and disable 802.11 and
Bluetooth, click System Settings.
• To set conditions that trigger error, warning, and information
alert messages, click Alerts.
• For network-related settings (such as DNS, WINS, Net1), for
web and email server information, or if you are using a network
management application such as Intermec SmartSystems, click
Network Services.
7 Make any changes to the settings you want to configure.
8 To save your changes, click Save.
To reset all parameters on the page to the default settings, click
Default Settings.
Configure the Printer with PrintSet 5
PrintSet 5 is a printer configuration tool that enables you to easily
change your configuration settings. You can also use the setup wizards
in PrintSet 5 to guide you through common configuration tasks.
1 Make sure that you have Windows XP or later running on your PC.
2 Download PrintSet 5 from the Downloads page of the Intermec
website at www.intermec.com/products/printers_media/
software/index.aspx.
3 Connect your printer to your PC using a serial, USB, or network
(Ethernet or Wi-Fi) connection.
To Next Page
Loading...
