Chapter 1 — About the Printer
PM23c, PM43, and PM43c Mid-Range Printer User Manual 15
• In the numeric keypad, press to toggle between shifted and
unshifted key characters. For example, press the up arrow to toggle
between $ and # in the numeric keypad.
When you are finished typing, press to return to the menu and
then save your information.
About the Printer Wizards
The full touch printer firmware includes several wizards you can use to
quickly set up your printer. The available wizards depend on the
hardware you have installed in the printer. You can start all of the
wizards from the Main menu except for the startup wizard. The
startup wizard appears the first time you turn on the printer and after
the printer has been reset to the factory default state.
Printing Wizards
Wizard Description
Media Setup Select media and printing type (DT or TTR), media
width, length, and X-margin, Start and Stop Adjust
values, and print speed.
Print Quality Prints a series of labels to determine the best print
quality setting.
Loading Media Shows how to load media.
Loading Ribbon (TTR printers only) Shows how to load ribbon.
To Next Page
Loading...
Need help?
General