Intermec PM4I Installation Instructions

6 EasyLAN Wireless Interface Kit Installation Instructions
Chapter 1 — Introduction
 e following table indicates the areas of intended use of the equipment
and any known restrictions.
Country of
Intended Use
Yes No License
Required
Restric-
tions
Details
Austria X
Belgium X
Denmark X
Finland X
France X X 2454 to 2483 MHz
bands must not be
used outdoors on this
device.
Germany X
Greece X
Ireland X
Italy X
Luxembourg X
 e Netherlands X
Portugal X
Slovenia X
Spain X
Sweden X
United Kingdom X
Other non-EU:
Iceland X
Liechtenstein X
Norway X
Switzerland X
Additional EMI/RFI Compliance
 is device meets the Class B limit requirements of CISPR 22.

Intermec PM4I Specifications

General

Print Technology	Direct thermal / Thermal transfer
Resolution	203 dpi
Max Print Width	4.09 inches
Connectivity	USB, Serial, Parallel
Optional Connectivity	Ethernet, Wireless
Memory	16 MB SDRAM, 8 MB Flash
Operating Temperature	+5°C to +40°C (+41°F to +104°F)
Storage Temperature	-20°C to +60°C (-4°F to +140°F)