Intermec PM4I Installation Instructions

4 EasyLAN Wireless Interface Kit Installation Instructions
Chapter 1 — Introduction
Note: To maintain compliance with FCC Rules, the input/
output (I/O) cables that interconnect between the device and
any peripheral must be as specifi ed by Intermec.
Industry Canada Compliance
 is Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
 is device requires a radio license, unless it is used totally inside a build-
ing. ( e user must obtain this license.)
Cet appareil numérique de la classe B respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
Cet appareil exige une license radio à moins d’être entièrement installé
dans un bâtiment. (L’utilisateur doit obtenir cette license.)

Intermec PM4I Specifications

General

Print Technology	Direct thermal / Thermal transfer
Resolution	203 dpi
Max Print Width	4.09 inches
Connectivity	USB, Serial, Parallel
Optional Connectivity	Ethernet, Wireless
Memory	16 MB SDRAM, 8 MB Flash
Operating Temperature	+5°C to +40°C (+41°F to +104°F)
Storage Temperature	-20°C to +60°C (-4°F to +140°F)