Chapter 1 — Introducing the SR31T Tethered Scanner
SR31T Tethered Scanner User’s Guide 3
SR31T Model Type: The model type of your SR31T is indicated in the first part
of the configuration number. In this illustration, the model type is SR31T1D-
Sxxx for standard 1D imager.
Supported Interfaces
The SR31T supports the following interfaces:
• USB—HID keyboard, virtual COM, IBM Sure POS, and HID POS
• Standard RS-232
• Keyboard wedge/Y-Cable
• Wand emulation
Powering the SR31T
The SR31T is powered through the accessory cable that connects it to
the host computer. Depending on the interface type you are using,
power for the SR31T is supplied either directly by the host computer
or comes from an external power supply connected to the interface
cable.
CN: XXXXXXX-XXXX
SR31T1D-Sxxx
XXXXXXXX
MODEL, , :
MFD, , : YYYYMMDD
To Next Page
Loading...
Need help?
General
