Chapter 2 — Scanning with the SR31T Tethered Scanner
12 SR31T Tethered Scanner User’s Guide
Understanding the Beeps and Vibrate Alert
The SR31T beeps to give you audio feedback and vibrates when
performing some functions. For example, you hear a beep each time
you scan a valid bar code.
Using Vibrate Alert
You can configure the SR31T to vibrate when it successfully decodes a
bar code. This feature can be useful in these situations:
• You are in a noisy environment, such as a busy warehouse, where it
can be difficult to hear the beeps.
• You are working in a quiet environment, such as a library, where
you do not want to make a lot of noise.
To turn on vibrate alert
• Scan this bar code:
Turn on vibrate alert
Default SR31T Beep and Vibrate Alert Descriptions
Beep Sequence What it Means
Two beeps and
vibrate alert (can
be deactivated)
Power-up
Single beep The scanner successfully scanned a bar code.
Two fast beeps Configuration bar code successfully scanned
Six very fast beeps
and vibrate alert
(can be
deactivated)
Transmission error
OR
Configuration bar code was not accepted
Multi-beep melody The SR31T firmware has been successfully upgraded
(see Upgrading the SR31T firmware in Chapter 5)
Six-beep melody Scanner confirmation after rescue procedure (see
Rescuing the SR31T in Chapter 5).
To Next Page
Loading...
Need help?
General
