Chapter 1 — Introducing the SR31T Tethered Scanner
4 SR31T Tethered Scanner User’s Guide
Connecting the Interface Cable
The cable you use depends on your host device and interface. See the
cable list in the Required Accessories section on page 6 for a list of
common cables and Chapter 3, SR31T Interfaces, for full details on
how to connect your product to the different interfaces supported.
All cables are connected to the scanner in the same way - insert the
SR31T cable connector into your product’s cable socket and push
firmly until you hear or feel a click.
If your cable is electrically supplied by the host or an external power
supply, the SR31T will beep and vibrate and the blue Intermec-Ready-
to-Work indicator™ LED will come on (default settings).
To Next Page
Loading...
Need help?
General
