Intermec SR31T User Manual

Chapter 2 — Scanning with the SR31T Tethered Scanner
SR31T Tethered Scanner User’s Guide 17
Autostand for the SR31T1D
When using the 1D model, Autostand is a mix of Level and Flashing
triggering modes. When in Level mode you simply pull the trigger to
scan a bar code (handheld scanning). After a period of inactivity the
scanner switches to Flashing mode (configurable timeout). When the
scanner is flashing you can present a bar code in front of the scanner
window and it will be scanned. To return to Level mode, pull the
trigger.
Autostand for 2D Models (SR31T2D, SR31THP)
When using 2D and HP models, Autostand is a mix of Level and
Presentation triggering modes. When in Level mode you simply pull
the trigger to scan a bar code (handheld scanning). After a period of
inactivity the scanner switches to Presentation mode (configurable
timeout). In this mode, the scanner turns on automatically when it
detects movement in front of the scanner window. This allows you to
use your scanner for hands-free scanning. To return to Level mode,
pull the trigger.

Intermec SR31T Specifications

General

Brand	Intermec
Model	SR31T
Category	Scanner
Language	English