1. Introduction
8
Safety Precautions, Continued
Proper Connection of Power Injector
Never connect the Gigabit Ethernet (S-FTP) cables coming from the OUT
receptacle of power injector to network switches / routers / laptops.
There is risk of network devices failure due to potential power that is carrying
inside the cable.
Connect the OUT receptacle of power injectors to electrical GbE port of radio
unit as described in current manual.
Proper Radio Unit Power Up
Do not plug / unplug:
The Ethernet cable to / from the radio unit when the power injector
operates (powering through power injector).
There is risk of radio unit failure.
Always ensure that the power supply source / power injector is OFF before
plugging / unplugging.
Laser Radiation
When using SFP, then the OSDR is a CLASS 1 laser product.
To Next Page
Loading...
