Intracom OSDR - Introduction; About this Document

Outdoor Software Defined Radio (OSDR) platform
Installation & Cabling Manual - Edition 3.0
3
1. Introduction
About this Document
Scope of
Document
The scope of this document is to provide detailed instructions on the
installation and cabling of OSDR (Outdoor Software-Defined Radio platform)
wireless product.
This document applies for installation of all available operation
modes: PtMP Hub
(1)
, PtMP TS
(2)
and PtP Node
(3)
.
Target
audience
This document is addressed to certified technicians with wireless equipment
knowledge and skills concerning the following:
• Outdoor Radio Unit Installation (pole installation).
• Antenna installation.
• Preparation & Termination of: Ethernet & Grounding cables.
• Laying and Installation of: Ethernet, Fiber Optic & Grounding cables.
• Testing Ethernet cables using Ethernet cable testers.
Reference
manuals
The reference manuals are listed below:
Item
Description
1
Lightning & Surge Protection for Intracom Telecom Radios – Installation
Practices.
2
OSDR Product Catalog.
3
OSDR System Description.
4
Lightning & Surge Protector (LSP) Datasheet.
5
WiBAS
TM
-Connect Installation.
6
OSDR Commissioning.
Continued on next page
(1)
WiBAS
TM
OSDR Hub.
(2)
WiBAS
TM
OSDR Terminal Station (TS). For WiBAS
TM
-Connect refer to item 5 of the Reference
manuals.
(3)
OmniBAS
TM
-OSDR.