Outdoor Software Defined Radio (OSDR) platform
Installation & Cabling Manual - Edition 3.0
45
3.3. Installation Tools
Prerequisites
It is installer responsibility to provide the tools for equipment installation.
Equipment
installation
1
Adjustable torque U-wrench tool (up to 29
mm opening and supporting max tightening
torque 40 Nm).
Used for tightening screws and nuts.
2
Adjustable torque wrench tool with bits
(supporting max tightening torque 20 Nm).
Used for tightening screws and nuts.
3
Set of allen keys.
Used for radio polarization change and
cable holder installation.
4
Digital inclinometer with magnetic base.
Used for sectoral antennas alignment
works.
5
13 mm wrench.
Used for sectoral antenna verticality works.
Continued on next page
To Next Page
Loading...
