Intracom OSDR - Page 20

2. Materials
14
Mounting Kits, Continued
Pole hose
clamps
Stainless steel hose clamp for pole installation of ETH-SRG-OD68 lightning
surge protector (one ETH-SRG-OD68 requires 2 clamps).
The following table shows the available hose clamps:
Item Order Code Description
A
ST-CL64-140
∅ 64-140 mm, width = 14.2 mm.
For
∅
48-100 mm pole diameter.
B ST-CL102-178
∅ 102-178 mm, width = 14.2 mm.
For
∅
75-149 mm pole diameter.
C
ST-CL172-248
∅ 172-248 mm, width = 14.2 mm.
For
∅
150-229 mm pole diameter.
D
ST-CL242-318
∅ 242-318 mm, width = 14.2 mm.
For
∅
230-300 mm pole diameter.