inVENTer Connect. - Page 20

20
OPERATION AND SET-UP ON THE CONTROLLER
inVENTer Connect controller platform | Operating instructions
► Set the hours by pressing the navigation
keys (up and down arrow key).
► Press the select key to conrm the selec-
tion (hours).

The hours are set.

The next eld for setting (minute display) becomes
active and ashes.
► Press the navigation keys (up and down
arrow key) and set the minutes.
► Press the mode key to complete the time
setting and go to the date setting.
Setting the date

The year display is active and ashes.