INVENTOR COOL

9
Introduction for b uttons on rem ote controller
Note:
● Range of time setting is: 0.5~2h
● The interval between two motions cant eceed 5s, otherwise the remote con
troller will eit setting status.
F unction introduction for com b ination b uttons
Press  and  buttons simultaneously can turn on or turn off child lock function.
hen child lock function is started up, C indicator on remote controller is .
If you operate the remote controller, remote controller won’t send signal.
Child lock function
T em perature display sw itchov er function
nder  status, press  button and Dbutton simultaneously can switch
between °C and °.
Operation g uide
1.
After putting through the power, press  button on remote controller to
turn on the air conditioner.
2.
Press D button to select your required mode: AUT, C, DRY , A,
AT.
3.
Press  or  button to set your required temperature. (Temperature can’t be
adusted under auto mode).
4.
Press A button to set your required fan speed: auto, low, medium and high
speed.