INVENTOR COOL User Manual

18
Install drainag e pipe
Note:
Install drainage pipe before using, otherwise poor drainage will affect normal
operation of the unit.
1. Remove the rubber plug at drainage port.
2. i the drainage pipe clip on the right of rear side plate near drainage port with
a screw.
3. Put the drainage pipe into drainage port and screw it up, and then bind it with
pipe hoop.
. Put the rubber plug into the other side of drainage pipe,  it with pipe hoop and
then  it in the drainage pipe clip.
rubber plug drainage port
drainage port
drainage port
drainage pipe clip
drainage pipe clip
screw
pipe hoop
pipe hoop
rubber plug
drainage pipe

INVENTOR COOL Specifications

General

Brand	INVENTOR
Model	COOL
Category	Air Conditioner
Language	English