iPECS eMG80 - Call Duration Warning Tone

iPECS eMG80
Hardware Description and Installation Manual Issue 1.0
48
Figure 4.7.6-1 PRIU
Table 4.7.6-1 Connector and Modular Jack Function
Connector and Modular jack
Connector
Functions
Remark
CN1
Connection for CN2 MBUI or MBUID
40 Pins
MJ1 PRI, E1R2 line RJ45
Table 4.7.6-2 PRIU PRI/E1 Function SW1
Switch setting
Pole Function
Operating Mode
Remarks
ON
OFF
1 E1R2 or PRI mode E1R2 PRI mode
Default =
OFF
2 Reserved -
Table 4.7.6-3 PRIU LED Indications
LED Indications
LED
Color
Description
LD1 Blue
ON : FPGA programmed
OFF : FPGA not programmed
LD2 Blue Flash (500ms): normal
LD3 Blue
ON: PRI channel in use
OFF: All PRI channels idle
LD4 Red
ON: Line error
OFF: normal