44
The Power Detect indicator could potentially be used in applications when the host wants to detect if an
Iridium Edge Cable has been tampered. It could also be used during installation to provide feedback if the
Iridium Edge has power applied.
3.6 RF Specifications
The RF specifications for the Iridium Edge are listed in the table below. These specifications are not
required to use the Iridium Edge, but may be required for some local regulatory equipment approvals
Table 3-16 RF Specifications
4 Mating Cable Guidelines
Iridium’s Service Providers are responsible to provide the end users with quality mating cables that meet
the required specifications for a particular installation type. These specifications will vary depending on
geography, industry requirements, local regulations, environment and specific end user needs.
Service Providers not equipped to fabricate mating cables should contact a qualified cable assembly
house. For those Service Provides qualified to make cables, Iridium offers a general purpose Blunt Cut
cable to accelerated prototypes and early production deployments. It is important that the Service
Provider ensures that the Blunt Cut cable’s specifications meets the installation requirements before
To Next Page
Loading...
